INDEXATOR
Harvester-rotator
HX35 Q LS
Harvester-rotator HX35 Q LS
8.340,00 €
Prices excl. VAT plus Shipping costs
Please login, to see your prices as a reseller. Don't have an account yet? Register quick and easy.
Product no.: 7350001
Description
- The best harvester rotator from Indexator
- Powerful motor floating in the housing
- Stable upper mount with 62 mm Bolt
- Suitable for MPB-2 swing dampers
- Stable connection to the head through housing with base holes
- Large bearings absorb tensile and compressive forces from all directions
- The industry standard for harvester rotators
- For medium and large wheeled harvesters and excavator harvesters up to 25 t operating weight
- Suitable for medium and large wheeled harvesters and excavator harvesters up to 25 t operating weight.
- Significantly longer service life: drive motor and bearings have been physically separated from each other
- Optimally designed for very heavy loads, regardless of the direction from which the force is applied
- High-performance bearings can handle loads from all directions: axial, radial, tensile and compressive
- Proven vane motor: Provides high torque and is insensitive to forced rotation and large swivel masses
- Maintenance-friendly: The plain bearing can be replaced without having to open the motor
- There is no screw connection between the flange and shaft: The rotator housing is screwed to the tilt frame of the harvester
- Can be bolted at different angles as there are 10 M16 blind holes in the housing - so you can use the best position for the hoses
- Hose connections axially downwards and radially downwards on the side of the housing
- Lower overall height compared to the H rotators
- High torque 3300 Nm
- 160 kN lifting capacity
- Interfaces are as with the previous H rotators
- Top interface: Suitable for the best INDEXATOR Swing damper: MPB-2
- Bottom interface: The hole pattern 6xM16-173 fits in various positions; 10 holes with M16 thread available for this purpose
- Hydraulic connections for rotation optionally possible axial at the bottom or radial at the bottom
- ATTENTION:Â No hydraulic connections on the top of the rotator
- A rotator with the designation LS is not equipped with a throttle. This means that the oil flow of the base machine must be adapted.
- Calculation of the suitable screw length when using wedge lock washers Example: Tilting frame 20 mm thick: 20+49.6 mm = 69.6 mm Suitable screw length M16x65 mm
Suitable for
Scope of delivery
Last viewed products